EDN

EDN, May 26, 2011

Issue link: http://dc.ee.ubm-us.com/i/43174

Contents of this Issue

Navigation

Page 14 of 63

S P E C I A L A D V E R T I S I N G S E C T I O N RAQ' s Strange stories from the call logs of Analog Devices Considerations on High-Speed Converter PCB Design, Part 3: The E-Pad Low Down Q. What are some important PCB layout rules when using a high-speed converter? A. Part 1 discussed why splitting AGND and DGND is not necessary unless cir- cumstances within the design force that choice. Part 2 discussed the power deliv- ery system (PDS), and how squeezing the power and ground planes together pro- vides additional capacitance. Part 3 dis- cusses the exposed pad (E Pad), another overlooked item that is essential for get- ting the best performance and most heat out of your PCB design. The E-Pad (pin 0), is the paddle found underneath most modern high-speed ICs. An important connection, it ties all internal grounds from the die to a cen- tral point under the device. The E-Pad is responsible for the lack of ground pins in many converters and amplifiers. The key is to solder this pad to the PCB, making a robust electrical and thermal connection. If not, havoc can occur in your system. Three steps help to achieve the best electrical and thermal connection to the E-Pad. First, if possible, replicate the E-Pad on each PCB layer. This creates a thick thermal connection to all grounds, allowing heat to dissipate quickly, and is especially important for high-power parts. Electrically, this gives a nice equal connec- tion to all the ground layers. Replicating the E-Pad on the bottom layer allows it to serve as a ground point for decoupling and a place to attach a heat sink or ther- mal relief. Second, partition the E-Pad into equal segments. A checkerboard pattern works best, and can be implemented by a silk- screen crosshatch or solder mask. There is no guarantee as to how solder paste will flow to connect the device to the PCB during the reflow assembly process, so the connection might be present but not evenly distributed or, worse yet, it might be small and positioned in a corner. Dicing the E-Pad into smaller partitions places a connection point in each sepa- rate area, ensuring a robust, even connec- tion between the device and the PCB. Finally, make sure that each partition has via connections to ground. The partition is usually big enough so that several vias can be placed. Make sure each of these vias are filled with solder paste or epoxy before assembly. This important step will ensure that the E-Pad solder paste won't reflow into the via voids, which would otherwise lower the chance of obtaining a proper connection. To Learn More About High-Speed Layout http://dn.hotims.com/34932-100 Contributing Writer Rob Reeder is a senior converter applications engineer working in Analog Devices high- speed converter group in Greensboro, NC since 1998. Rob received his MSEE and BSEE from Northern Illinois University in DeKalb, IL in 1998 and 1996 respectively. In his spare time he enjoys mixing music, art, and playing basketball with his two boys. Have a question involving a perplex- ing or unusual analog problem? Submit your question to: www.analog.com/ askrob For Analog Devices' Technical Support, Call 800-AnalogD SPONSORED BY

Articles in this issue

Links on this page

Archives of this issue

view archives of EDN - EDN, May 26, 2011