Design News, February 2013

Issue link:

Contents of this Issue


Page 34 of 99

calories burned, and syncs those stats to your computer and/ or smartphone. In doing so, it keeps a record of how much more you do each day. The Zip encourages you to set and exceed goals. Being the competitive person that I am, it really worked. But duty called, and it was time to end my relationship with the Zip. Taking it apart revealed frankly, not much. I guess that's the beauty of the design, its simplicity from a hardware perspective. It contains a display, a processor, a communications IC, a bunch of sensors, and the usual passives and logic. The complex functionality combined with the limited number of components results in a fairly impressive design. I reached out to Fitbit's CEO, James Park, who, as it turns out, was quite hands-on with the design of this device. Since this is the third (or fourth, depending on how you count) generation, the company had a lot of experience developing wearable wireless devices. The original Fitbit device debuted in 2009.The Ultra came out in 2011, and was a revision of the first product.Then there's the Fitbit One and the Zip. A key part of the revisions was a continual refinement of the power management circuitry. Another component that shows up in the One that makes it a real differentiator is an altimeter, a sensor that lets the device measure the number of floors the user has climbed. There are various wireless media that could have been deployed in the Zip. They chose Bluetooth low energy, specifically the nRF8001 from Nordic Semiconductor. The part integrates a fully compliant Bluetooth v4.0 low energy radio, link layer, and host stack, and features a simple serial interface that supports a wide range of external microprocessors. In the Zip, it connects to an STMicroelectronics Cortex M3 processor. With peak currents as low as 12.5 mA and average currents down to 9 mA (for a 1-second connection interval), the nRF8001 enables a battery life ranging from months to years from a single coin cell. It also includes an analog-to-digital converter for battery-level monitoring, and a low-tolerance 32-kHz RC oscillator that eliminates the need for an external 32-kHz crystal. That's another example of how the Fitbit engineers minimized the components/size of the end device. The IC fits in a 5 mm x 5 mm QFN package. Because there was no way to tell how and where the user would "wear" the Zip, lots of scenario testing had to be done. According to Park, "We ran tests with the device being worn in all the places that it was likely to be worn and took measurements in all those spots. Obviously the characteristics of the radio and its performance will differ when it's close to your body as opposed to just lying on a table." . We'll make YOU a fan. Smart Fans That Put You in Control Lowest Cost Short Fan Tray Slides into any standard 19" rack 3-Position AC Tray Series #: OA300ST Size: 432x203x44.5mm Air Flow: 310 CFM Replace your existing fans with smart AC or DC fans and fan trays from Orion. Temperature control fans reduce energy costs by cooling only when you need to. • Reduce energy costs up to 30% • Reduce noise • Extend fan life • Simple to replace with no additional connections • Available from stock at Orion Fans Shortest lead time Great prices More control • Lower energy consumption • Longer fan life Start saving money with smart fans and trays from Orion Fans. AC Fans • DC Fans • Fan Trays • Accessories 800.323.2439 • 214.340.0265 Design News | february 2013 | www.d esign n KE821 Ad Film.indd 1 –33– 1/17/13 3:00 PM

Articles in this issue

Links on this page

Archives of this issue

view archives of DesignNews - Design News, February 2013